General

• Constructed from aluminium and technopolymer
• Epoxypolyester powder painting, RAL9002 colour
• Top mount (OTT)
• Transmission through toothed belt
• Slip-ring
• Electronic limit switches
• Zero backlash
• Pre-installed camera and lens

Mechanical

• Cable glands: 3xM16
• Horizontal rotation: 360°, continuous rotation
• Vertical rotation: from -40° up to +90°
• Horizontal speed (variable): from 0.02°/s up to 100°/s
• Tilt speed (variable): from 0.02°/s up to 50°/s
• Internal usable dimensions (WxHxL): 90x115x325mm (3.5x4.5x13in)
• Accuracy of preset positions: 0.02°
• Unit weight: 17kg (37lb)

Housing's window

• Germanium window
• Thick: 4mm (0.16in)
• External treatment: antiscratch (Hard Carbon Coating - DLC), antireflection
• Internal treatment: antireflection
• Spectral range: from 7.5μm up to 14μm
• Medium transmittance (from 7.5μm up to 11.5μm): 88.1%
• Medium transmittance (from 11.5μm up to 14μm): 77.7%

Electrical

• Supply voltage/Current consumption:
• 230Vac, 0.4A, 50/60Hz
• 120Vac, 0.8A, 50/60Hz
• 24Vac, 4A, 50/60Hz
• Power consumption:
• 100W max
• 28.5W, P&T static, heating switched off
• 4 self-powered alarm inputs
• 2 dry contacts: 30Vdc max o 30Vac, @ 1A

Network

• Connector: RJ45, 10BASE-T/100BASE-T

• Protocol: ONVIF, Profile S (TCP/IPv4, UDP/IPv4, HTTP, NTP, DHCP, WS-DISCOVERY, QoS, RTSP, RTCP, RTP)

Serial communications

• Configuration through OSM
• 2 half-duplex serial RS-485 interfaces or full-duplex RS-422
• Firmware updating from console in remote mode (PELCO D, MACRO)
• Up to 999 units, addressable by means of dip-switches

• Protocols supported: AMERICAN DYNAMICS, ERNITEC, PANASONIC, PELCO D, MACRO

Video

• Compression: H.264/AVC, JPEG
• Independent video streams: 2
• Image resolution: from Full D1 (720x576 for PAL, 720x480 for NTSC) to 352x240 in 18 steps

Cameras

• Thermal camera (336x256):
• Pixel dimension: 17μm
• Digital Zoom: 4x
• Thermal sensitivity (NEdT): < 50mK at f/1.0
• Spectral response - long wave infrared (LWIR): from 7.5μm to 13.5μm
• Internal shutter (only for sensor compensation): Video stop < 1sec.
• Scene range (High Gain): -40°C ÷ +160°C (-40°F ÷ +320°F)
• Scene range (Low Gain): -40°C ÷ +550°C (-40°F ÷ +1022°F)
• Thermal camera (640x512):
• Pixel dimension: 17μm
• Digital Zoom: 8x
• Thermal sensitivity (NEdT): < 50mK at f/1.0
• Spectral response - long wave infrared (LWIR): from 7.5μm to 13.5μm
• Internal shutter (only for sensor compensation): Video stop < 1sec.
• Scene range (High Gain): -40°C ÷ +160°C (-40°F ÷ +320°F)
• Scene range (Low Gain): -40°C ÷ +550°C (-40°F ÷ +1022°F)

Lenses

• 3x optical zoom, 35-105mm, F1.6
• Minimum focusing distance: 7m (23ft)
• Field of view (640x512 pixel):
• Wide: 17.97°H, 14.33°V
• Zoom tele: 5.93°H, 4.75°V
• Field of view (336x256 pixel):
• Wide: 8.98°H, 7.15°V
• Zoom tele: 2.97°H, 2.38°V

Environment

• For indoors and outdoors installation
• Operating temperature: from -40°C (-40°F) up to +65°C (149°F)*
• Cold start: -40°C (-40°F)
• Surge immunity: up to 1kV line to line, up to 2kV line to earth (Class 4)
• * peak temperature
• Relative humidity: from 10% up to 95% (no condensation)

Certifications

• Electrical safety (CE): EN60950-1, IEC60950-1, EN62368-1, IEC62368-1
• Electromagnetic compatibility (CE): EN50130-4, EN610000-6-4, EN55022 (Class A), FCC Part 15 (Class A)
• Outdoor installation (CE): EN60950-22, IEC60950-22
• IP protection degree: EN60529, IP66
• Salty fog resistance: EN50130-5, EN60068-2-52
• UL certification : cULus Listed (TYPE 4X)
• EAC certification